Victron Lithium-Iron-Phosphate Battery 25.6V/100Ah

Victron Lithium-Iron-Phosphate Battery 25.6V/100Ah

Part #: BAT524110610

Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery, therefore, consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.

An LFP battery does not need to be fully charged. Service life even slightly improves in the case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other

Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery, therefore, consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.

An LFP battery does not need to be fully charged. Service life even slightly improves in the case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency.

Victron lithium batteries must be installed with a Battery Management System (BMS) to:

1. Generate a pre-alarm whenever the voltage of a battery cell decreases to less than 3,1V (adjustable 2,85 - 3,15 V).
2. Disconnect or shut down the load whenever the voltage of a battery cell decreases to less than 2,8V (adjustable 2,6 V - 2,8 V).
3. Stop the charging

Manufacturer: Victron

Part #: BAT524110610

Length/Depth: 6.41 in.

Width: 25.59 in.

Height: 7.75 in.

Weight: 61.72 lbs.

Voltage: 25.60 V

Marine Cranking Amps: n/a

Cold Cranking Amps: n/a

C20 Amp-Hour Rating: 100 Ah

Battery Chemistry: Lithium

BMS: External

  • Ships in 1 - 2 Weeks

Go to Checkout

Related Content