Promariner ProSafe FS Galvanic Isolator 60A

Promariner ProSafe FS Galvanic Isolator 60A

Part #: 22074

The ProSafe FS Series of FailSafe 30 and 60 Amp Galvanic Isolators will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation with a July ’08 release date.

ProSafe FS installs easily and does

The ProSafe FS Series of FailSafe 30 and 60 Amp Galvanic Isolators will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation with a July ’08 release date.

ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. Both the ProSafe 30 and 60 Amp models are built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.

Manufacturer: Promariner

Part #: 22074

Length/Depth: 7.25 in.

Width: 6.50 in.

Height: 3.75 in.

Weight: 3.70 lbs.

Frequency: 50-60 Hz

Max Amps: 82 Amps

Operating Voltage: 120/240 VAC